Ubiquiti Unifi Wi-Fi 6 Mesh AP 4x4 Mu-/Mimo Wi-Fi 6, 2.4Ghz @ 573.5Mbps & 5GHz @ 4.8Gbps, PoE Injector IncludedIndoor/outdoor, 4x4 WiFi 6 access point designed for mesh applications. The UniFi6 Mesh (U6 Mesh) is a high-performance, four-stream WiFi 6 access point that provides best-in-class signal meshing to enhance the wireless coverage of home and enterprise networks. The U6 Mesh can reach an aggregate throughput rate up to 5.3 Gbps with its 5 GHz (4x4 MU-MIMO and OFDMA) and 2.4 GHz (2x2 MU-MIMO and OFDMA) bands. This access point also operates at full 4x4 MIMO with 160 MHz channels to create high-capacity wireless uplinks and facilitate faster data transfer. The sleek U6 Mesh is discreet enough to stage anywhere in your home or office, but also rugged enough to reliably operate outdoors thanks to its IPX5-rated, waterproof housing. The U6 Mesh is a plug-and-play device designed to easily extend your wireless signal to ensure full, seamless coverage and high-quality WiFi connectivity. It can be set up in minutes and fully managed with the UniFi Network web application or mobile app. Features High-efficiency 4x4 WiFi 6 (802.11ax) 5 GHz (4x4 MU-MIMO and OFDMA) band with a 4.8 Gbps throughput rate 2.4 GHz (2x2 MU-MIMO and OFDMA) band with a 573.5 throughput rate Operates at full 4x4 MIMO with 160 MHz bandwidth Powered with PoE (PoE adapter included)

Read more less

TP-Link Archer MR600 4G+ Cat6 AC1200 Dual Band Gigabit Router with OneMesh 4G+ Cat6 Broadband with Dual-Band Wi-Fi — Australian Carrier Ready The TP-Link Archer MR600 is a 4G+ Cat6 AC1200 dual-band Gigabit router that delivers fast, flexible broadband by simply inserting a SIM card. With Cat6 LTE speeds, full Gigabit wired ports, dual-band 802.11ac Wi-Fi, and compatibility with Telstra, Optus, and Vodafone’s Australian 4G networks, it’s an ideal primary or backup internet solution for homes, small offices, and remote sites. OneMesh support allows you to extend coverage by pairing it with compatible TP-Link range extenders. Key Features 4G+ Cat6 LTE — download speeds up to 300 Mbps over 4G (carrier and signal dependent) Australian carrier compatible — 4G FDD-LTE B5 (850 MHz) / B28 (700 MHz); 3G B5 (850 MHz) — works with Telstra, Optus, and Vodafone AC1200 dual-band Wi-Fi — 300 Mbps @ 2.4 GHz + 867 Mbps @ 5 GHz 4 × Gigabit ports — 1 × LAN/WAN + 3 × LAN for reliable wired connections to smart TVs, gaming consoles, and NVRs Micro SIM card slot — plug in and connect, no configuration required 2 × detachable external LTE antennas — replaceable with high-gain antennas for improved signal in weak coverage areas Wi-Fi router mode with VLAN tagging — use the LAN/WAN port as a fixed-line backup when 4G is unavailable TP-Link OneMesh compatible — pair with OneMesh range extenders to create a seamless whole-home mesh network WPS, wireless schedule, and WMM support Use Cases Primary 4G Broadband: Use a 4G SIM as your main internet connection where NBN or fixed-line broadband is unavailable or unreliable. Business Backup Internet: Configure the LAN/WAN port for fixed-line primary and 4G SIM as automatic failover — keeping your business online when the fixed line drops. Remote & Rural Properties: Deliver broadband to farms, rural homes, and remote work sites using Telstra or Optus 4G coverage. Temporary Sites: Pop-up offices, construction sites, and events benefit from instant 4G connectivity without fixed-line contracts. Whole-Home Wi-Fi: Pair with TP-Link OneMesh range extenders to eliminate dead zones across larger homes without a separate mesh system. Specifications Specification Detail Model Archer MR600 4G Standard 4G+ LTE Cat6 — FDD-LTE B5 (850 MHz) / B28 (700 MHz) 3G Standard HSPA+ B5 (850 MHz) SIM Card Micro SIM Wi-Fi Standard IEEE 802.11a/n/ac (5 GHz), IEEE 802.11b/g/n (2.4 GHz) Wi-Fi Speed 300 Mbps @ 2.4 GHz + 867 Mbps @ 5 GHz (AC1200) LAN Ports 3 × 10/100/1000 Mbps Gigabit RJ45 LAN/WAN Port 1 × 10/100/1000 Mbps Gigabit RJ45 (fixed-line backup) LTE Antennas 2 × detachable external (TS-9 connector) OneMesh Supported Wireless Security WPA/WPA2, WPA-PSK/WPA2-PSK, 64/128-bit WEP Power Supply 100–240 V AC, 50/60 Hz — 12 V DC / 1.5 A output Dimensions (W × D × H) 229 × 160 × 37 mm Weight 0.8 kg Frequently Asked Questions Is the Archer MR600 compatible with Australian 4G networks? Yes. The MR600 supports FDD-LTE Band 5 (850 MHz) and Band 28 (700 MHz) — the primary 4G bands used by Telstra, Optus, and Vodafone in Australia. It also supports 3G on Band 5 (850 MHz) as a fallback in areas with limited 4G coverage. What type of SIM card does the MR600 use? The MR600 uses a Micro SIM card. If your carrier provides a nano-SIM, you will need a nano-to-micro SIM adapter. Data-only SIM plans are recommended for router use. Can I use the MR600 as a backup internet connection? Yes. The LAN/WAN port can be connected to a fixed-line modem (NBN, ADSL, or cable) as the primary connection, with the 4G SIM automatically taking over if the fixed line fails. This provides seamless failover for homes and businesses. What is Cat6 LTE and how fast is it? Cat6 LTE (Category 6) supports theoretical download speeds of up to 300 Mbps using carrier aggregation — combining two LTE bands simultaneously. Real-world speeds depend on your carrier, signal strength, and network congestion, but Cat6 typically delivers significantly faster speeds than Cat4 (150 Mbps) routers in good coverage areas. Can I improve 4G signal reception? Yes. The two detachable LTE antennas use TS-9 connectors, allowing you to replace them with optional high-gain external antennas or connect to a roof-mounted directional antenna for improved signal in weak coverage areas. What is OneMesh and how does it work with the MR600? OneMesh is TP-Link’s mesh networking technology that allows compatible routers and range extenders to form a single unified network with one SSID. Pair the MR600 with a compatible TP-Link OneMesh range extender to extend Wi-Fi coverage throughout your home without a separate mesh system.

Read more less

TP-Link Deco X20 AX1800 Mesh Wi-Fi 6 System – 1-Pack | Up to 200m² Coverage Overview The TP-Link Deco X20 brings the speed and efficiency of Wi-Fi 6 (802.11ax) to your whole-home mesh network. A single unit covers up to 200m² with combined speeds of up to 1,800Mbps — 1,201Mbps on 5GHz and 574Mbps on 2.4GHz. Powered by a Qualcomm quad-core processor and featuring OFDMA, MU-MIMO, and BSS Color technology, it handles more devices simultaneously with lower latency than previous Wi-Fi generations. WPA3 security, TP-Link HomeCareTM parental controls, antivirus, and QoS are built in. Multiple Deco X20 units work together as one seamless network, with auto-roaming, self-healing, and optional Ethernet backhaul for maximum reliability. Key Features Wi-Fi 6 (AX1800) – Next-generation 802.11ax standard delivering up to 1,201Mbps on 5GHz and 574Mbps on 2.4GHz for faster, more efficient wireless performance. OFDMA & MU-MIMO – Quadruples network capacity by enabling simultaneous data transmission to multiple devices; ideal for busy households with many connected devices. Up to 200m² Coverage Per Unit – One Deco X20 covers up to 200m²; add more units to extend coverage across larger homes. Ultra-Low Latency – Wi-Fi 6 efficiency improvements significantly reduce latency for more responsive gaming, video calls, and real-time applications. Seamless Whole-Home Mesh – Multiple units form one unified network; devices auto-roam to the strongest Deco as you move through your home. WPA3 Security – Latest Wi-Fi security standard for stronger encryption and protection against brute-force attacks. TP-Link HomeCare™ – Built-in parental controls, antivirus protection, and Quality of Service (QoS) for a safer, more controlled online experience. Qualcomm Quad-Core CPU – 1GHz quad-core processor handles demanding multi-device workloads without slowdown. Optional Ethernet Backhaul – Connect Deco units via Ethernet for faster, more reliable inter-unit communication. Router & Access Point Modes – Flexible deployment as a standalone router or as an access point within an existing network. BSS Color, Band Steering & AP Steering – Advanced Wi-Fi 6 features that reduce interference and ensure devices connect to the optimal band and unit automatically. Use Cases Homes with 10+ connected devices requiring fast, reliable whole-home Wi-Fi 4K/8K streaming, online gaming, and video conferencing households Smart home environments with many IoT devices Upgrading from Wi-Fi 5 (AC) to Wi-Fi 6 (AX) for future-proofed performance Multi-storey homes or properties with dead zones needing seamless mesh coverage Home offices requiring low-latency, high-reliability wireless connectivity Technical Specifications Specification Details Model Deco X20 (1-Pack) Wi-Fi Standard Wi-Fi 6 (802.11ax/ac/n/a/g/b) 5GHz Speed Up to 1,201Mbps 2.4GHz Speed Up to 574Mbps Coverage (1-Pack) Up to 200m² Processor Qualcomm 1GHz Quad-Core CPU Antennas 4 × Internal Antennas Ethernet Ports 2 × Gigabit LAN/WAN Wi-Fi Technologies OFDMA, MU-MIMO, 1024-QAM, BSS Color, Beamforming, Band Steering, AP Steering Security WPA3, WPA2-PSK, WPA-PSK, SPI Firewall Operating Modes Router / Access Point Backhaul Wireless or Ethernet (Optional) WAN Types Dynamic IP / Static IP / PPPoE IPv6 Supported App Deco App (iOS & Android) Dimensions Φ110 × 114mm Frequently Asked Questions Do I need Wi-Fi 6 devices to benefit from the Deco X20? No. The Deco X20 is fully backwards-compatible with Wi-Fi 5 (AC), Wi-Fi 4 (N), and older devices. However, the full benefits of Wi-Fi 6 — including OFDMA efficiency, lower latency, and higher speeds — are realised when connecting Wi-Fi 6-capable devices such as recent iPhones, Android phones, laptops, and smart TVs. How does the Deco X20 compare to the Deco M4? The Deco X20 uses Wi-Fi 6 (AX1800) with OFDMA, MU-MIMO, WPA3, and a quad-core processor — delivering significantly higher speeds, lower latency, and better performance in device-dense environments. The Deco M4 uses Wi-Fi 5 (AC1200) and is a more budget-friendly option for smaller homes with fewer devices. If you have 10+ devices or Wi-Fi 6-capable hardware, the X20 is the better long-term investment. Is the Deco X20 compatible with Australian NBN connections? Yes. The Deco X20 supports Dynamic IP, Static IP, and PPPoE WAN types, covering all major Australian NBN connection types (FTTC, FTTN, FTTB, HFC, FTTP). Its Gigabit Ethernet ports support NBN plans up to 1Gbps. Check with your ISP for any specific VLAN or PPPoE configuration requirements. What is OFDMA and why does it matter? OFDMA (Orthogonal Frequency Division Multiple Access) is a Wi-Fi 6 technology that allows the router to serve multiple devices simultaneously within a single transmission, rather than one at a time. This dramatically improves efficiency and reduces latency in environments with many connected devices — such as smart homes, home offices, and households with streaming, gaming, and IoT devices all running at once. Can I mix Deco X20 units with other Deco models? Yes. The Deco X20 is compatible with other Deco models, allowing you to mix units in a single mesh network. Note that the network will operate at the capabilities of the lowest-spec unit in the mesh for inter-unit communication. Does the Deco X20 include HomeCare security features? Yes. TP-Link HomeCare™ is built in and includes parental controls (content filtering and time scheduling), antivirus protection powered by Trend Micro, and Quality of Service (QoS) for prioritising bandwidth to specific devices or applications. A HomeCare subscription may be required for ongoing antivirus updates — check the Deco app for current subscription details. NBN Tip: The Deco X20 includes Gigabit Ethernet ports, making it suitable for NBN plans up to 1Gbps. For multi-unit mesh setups, using Ethernet backhaul between Deco units will deliver the fastest and most reliable inter-unit performance — particularly important on high-speed NBN plans.

Read more less

Whole-Home Wi-Fi Without the Dead ZonesThe TP-Link Deco E4 2-pack is a whole-home mesh Wi-Fi system that replaces your traditional router with a network of units working together to deliver seamless, fast wireless coverage throughout your home. With AC1200 dual-band speeds and Deco Mesh Technology, your devices automatically connect to the strongest Deco unit as you move room to room — no manual switching, no dropouts.Key Features Covers Up to 260m² — two Deco E4 units provide whole-home coverage for most Australian homes; add more Decos anytime to extend further AC1200 Dual-Band Wi-Fi — up to 1167Mbps combined across 2.4GHz and 5GHz bands Seamless Roaming — Deco Mesh Technology creates a single unified network; devices switch automatically to the nearest unit for the fastest connection Supports Up to 100 Devices — handles busy households with smartphones, tablets, smart TVs, and IoT devices simultaneously Parental Controls — set time limits and block inappropriate content for individual family members via the Deco app Works with Most Australian ISPs — compatible with NBN, ADSL, and cable modems from Telstra, Optus, TPG, and more Easy Setup via Deco App — guided step-by-step setup from your smartphone in minutes Expandable System — add additional Deco units to the same network at any time to cover larger homes Typical Use Cases Eliminating Wi-Fi dead zones in multi-storey homes or homes with thick walls Replacing a single router that can’t cover the whole home Providing reliable Wi-Fi for smart home devices, security cameras, and streaming Family homes needing parental controls and guest network separation Rental properties and Airbnb hosts needing simple, reliable whole-home Wi-Fi Technical Specifications Specification Detail Model Deco E4 (2-pack) Wi-Fi Standard IEEE 802.11ac/n/a (5GHz), IEEE 802.11n/b/g (2.4GHz) Wi-Fi Speed AC1200: up to 1167Mbps combined Coverage (2-pack) Up to 260m² Max Connected Devices Up to 100 Ethernet Ports (per unit) 2× 10/100/1000Mbps Mesh Technology Deco Mesh (seamless roaming, single SSID) Management Deco App (iOS and Android) Security WPA/WPA2, Guest Network, Parental Controls WAN Connection Types Dynamic IP, Static IP, PPPoE, L2TP, PPTP Certifications CE, FCC, RoHS Warranty 3 Years Frequently Asked Questions Does the Deco E4 work with Australian NBN connections? Yes. The Deco E4 supports PPPoE, Dynamic IP, Static IP, L2TP, and PPTP WAN connection types, covering all common NBN connection methods. Connect the primary Deco unit to your NBN modem or gateway via Ethernet. Can I add more Deco units later to extend coverage? Yes. The Deco system is fully expandable. You can add additional Deco units (including other compatible Deco models) to your existing network at any time via the Deco app to cover larger homes or outbuildings. Do both Deco units need to be plugged into the router? No. Only the primary Deco unit connects to your modem via Ethernet. The second unit communicates wirelessly with the primary unit and only needs a power outlet. For best performance, Ethernet backhaul between units is recommended where possible. Does the Deco E4 replace my existing router? Yes. The primary Deco E4 unit acts as your router, connecting directly to your modem. You can disable your existing router’s Wi-Fi or put it in bridge/modem mode to avoid network conflicts. What is the difference between the Deco E4 and higher-end Deco models? The Deco E4 uses AC1200 Wi-Fi (802.11ac), which is well-suited for everyday browsing, streaming, and smart home use. Higher-end Deco models offer faster Wi-Fi 6 speeds, tri-band backhaul, and greater device capacity for larger or more demanding networks.

Read more less

TP-Link Deco X50-4G AX3000 4G+ Whole Home Mesh Wi-Fi 6 Gateway The TP-Link Deco X50-4G combines a built-in 4G+ Cat6 modem with AX3000 Wi-Fi 6 mesh technology in a single device, delivering fast, reliable whole-home internet without a fixed broadband connection. Simply insert a Nano-SIM card and enjoy download speeds up to 300Mbps shared across a seamless mesh Wi-Fi 6 network — ideal for Australian homes, farms, holiday properties, and temporary venues where NBN or cable internet isn’t available or practical. Key Features Built-in 4G+ Cat6 Modem — Supports LTE-Advanced Cat6 with downlink speeds up to 300Mbps — no separate modem or fixed broadband connection required. AX3000 Wi-Fi 6 (802.11ax) — Dual-band speeds up to 3000Mbps (2402Mbps on 5GHz + 574Mbps on 2.4GHz) with OFDMA and MU-MIMO for efficient multi-device performance. Whole-Home Mesh — Add additional Deco units to extend seamless Wi-Fi coverage throughout your home with a single network name and automatic roaming. 3 × Gigabit Ethernet Ports — Connect wired devices such as smart TVs, NVRs, gaming consoles, and desktop PCs at full Gigabit speeds. 3G/4G Failover — Automatically switches from a wired Ethernet WAN connection to 4G when the primary connection drops, keeping you online without interruption. TP-Link HomeShield Security — Real-time IoT protection, network threat detection, robust parental controls, and comprehensive usage reports via the Deco app. WPA3 Encryption — Latest Wi-Fi security standard for stronger protection against unauthorised access. Seamless Roaming — Deco units form a unified network; your devices automatically connect to the strongest node as you move through your home. Deco App Management — Set up and manage your network, connected devices, guest Wi-Fi, and parental controls from anywhere via the free Deco app (iOS & Android). Voice Control — Compatible with Amazon Alexa and Google Assistant for hands-free network control. Universal Deco Compatibility — Works with all other Deco models to expand mesh coverage as your needs grow. Use Cases Rural and regional Australian homes where NBN fixed-line coverage is unavailable or unreliable Farms, rural sheds, and outbuildings requiring whole-property Wi-Fi from a single SIM-based gateway Holiday homes, beach houses, and short-stay rental properties needing flexible internet without a long-term broadband contract Pop-up retail stores, temporary offices, and event venues requiring fast, portable internet setup Urban homes using 4G as a primary or failover internet connection alongside an existing Ethernet WAN Security installers deploying a VIGI NVR system in a location without fixed broadband — the Deco X50-4G provides the network backbone via 4G Technical Specifications Specification Detail Model Deco X50-4G (1-Pack) Wi-Fi Standard Wi-Fi 6 (IEEE 802.11ax/ac/n/a on 5GHz; 802.11ax/n/b/g on 2.4GHz) Combined Wi-Fi Speed AX3000 — up to 3000Mbps (2402Mbps @ 5GHz + 574Mbps @ 2.4GHz) 4G Modem LTE-Advanced Cat6; downlink up to 300Mbps; uplink up to 50Mbps SIM Type Nano-SIM (sold separately) 3G/4G Failover Yes — automatic switchover from Ethernet WAN to 4G Ethernet Ports 3 × Gigabit RJ45 (WAN/LAN configurable) OFDMA Yes (Uplink & Downlink) MU-MIMO Yes Security WPA3, TP-Link HomeShield (IoT protection, parental controls, threat detection) Mesh Technology TP-Link Mesh; compatible with all Deco models Seamless Roaming Yes — single SSID, automatic band/node switching Voice Control Amazon Alexa, Google Assistant App Deco (iOS & Android) Power Supply AC adapter (included) Weight Approx. 520g Warranty 2 Years Recommended Accessories TP-Link Deco X50 (Add-on Unit) — Expand mesh Wi-Fi 6 coverage to additional rooms or outbuildings by adding more Deco X50 nodes to the same network. Nano-SIM Card with 4G Data Plan — Required for 4G connectivity; compatible with all major Australian carriers including Telstra, Optus, and Vodafone. TP-Link VIGI NVR1104H-4P — Connect a VIGI NVR to the Deco X50-4G’s Gigabit port for a complete 4G-connected IP camera system in locations without fixed broadband. Cat6 Ethernet Cable — For connecting wired devices such as NVRs, smart TVs, or desktop PCs to the Deco’s Gigabit LAN ports. Frequently Asked Questions Does the Deco X50-4G require an NBN or fixed broadband connection? No. The Deco X50-4G has a built-in 4G+ Cat6 modem and operates entirely from a Nano-SIM card. It can also use a wired Ethernet WAN connection as the primary source, with 4G as automatic failover — or 4G as the sole internet source. Which Australian carriers are compatible? The Deco X50-4G supports LTE-Advanced Cat6 and is compatible with all major Australian 4G networks including Telstra, Optus, and Vodafone. Check your carrier’s 4G band coverage for your specific location before purchasing. Can I add more Deco units to extend coverage? Yes. The Deco X50-4G is compatible with all other Deco models. Additional Deco units can be added wirelessly or via Ethernet backhaul to extend seamless mesh Wi-Fi coverage to larger homes, sheds, or outbuildings. What is the 3G/4G failover feature? When the Deco X50-4G is configured with both an Ethernet WAN connection and a SIM card, it automatically switches to 4G if the wired connection drops — keeping your network online without any manual intervention. This is particularly useful for businesses that cannot afford downtime. Is HomeShield free? Basic HomeShield features including network security scanning and simple parental controls are available at no cost. Advanced features such as detailed content filtering, real-time threat intelligence, and comprehensive reports require a HomeShield Pro subscription, managed through the Deco app. Can I use this to provide internet for a CCTV or NVR system in a remote location? Yes. The Deco X50-4G’s Gigabit Ethernet ports can connect directly to a TP-Link VIGI NVR or PoE switch, providing the 4G network backbone for a complete IP camera system in locations without fixed broadband — such as farms, construction sites, or remote commercial properties.

Read more less

TP-Link Deco BE68 Wi-Fi 7 Mesh System — 3-Pack for Next-Generation Home Coverage The TP-Link Deco BE68 3-Pack delivers Wi-Fi 7 — the latest wireless standard — throughout your home with BE9300 tri-band speeds, Multi-Link Operation (MLO), and seamless whole-home mesh coverage. Designed for households that demand the absolute best in wireless performance, the Deco BE68 combines the speed of the 6 GHz band, the reliability of MLO, and the simplicity of the Deco app to create a network that’s fast, stable, and effortless to manage. Whether you’re on a high-speed NBN plan, running a smart home packed with devices, or simply tired of Wi-Fi dead zones, the BE68 is the upgrade your home deserves. Key Features Wi-Fi 7 (802.11be) Technology — The latest wireless standard with Multi-Link Operation (MLO), 4K-QAM, and 320 MHz channel bandwidth for dramatically faster speeds and lower latency than Wi-Fi 6E. BE9300 Tri-Band Speeds — Combined wireless throughput of up to 9300 Mbps across 2.4 GHz (688 Mbps), 5 GHz (2882 Mbps), and 6 GHz (5765 Mbps) bands. Multi-Link Operation (MLO) — Wi-Fi 7’s defining feature — simultaneously connects devices across multiple bands for lower latency, higher throughput, and improved reliability compared to single-band connections. Dedicated 6 GHz Backhaul — Reserves the high-speed 6 GHz band for inter-unit mesh backhaul, keeping the 5 GHz band fully available for client devices. 2.5G WAN & LAN Ports — Each unit includes 2.5 Gbps ports to fully utilise high-speed NBN 1000 and full-fibre connections without bottlenecking. Seamless Roaming — Automatically connects your devices to the strongest Deco unit as you move through your home, with no manual switching or dropped connections. 200+ Device Support — MU-MIMO and OFDMA efficiently manage large numbers of simultaneous connections across all bands. TP-Link HomeShield Security — Built-in network security with real-time threat detection, robust parental controls, and QoS traffic management via the Deco app. Easy Setup & Management — The TP-Link Deco app (iOS & Android) guides you through setup in minutes and provides ongoing network management from anywhere. Expandable Mesh System — Add more Deco BE68 or compatible Deco units at any time to extend coverage as your home or needs grow. Use Cases Large Homes & Multi-Storey Houses — Two Deco BE68 units blanket large homes with fast, consistent Wi-Fi 7 coverage across every floor and room. High-Speed NBN & Full-Fibre Connections — The 2.5G WAN port ensures you’re not bottlenecked on NBN 1000 or gigabit fibre plans. 4K & 8K Streaming — Deliver consistent high-bandwidth connections to smart TVs, streaming sticks, and media players throughout the home simultaneously. Online Gaming — MLO’s multi-band simultaneous connections deliver ultra-low latency for competitive gaming, even with other household members streaming or browsing. Work From Home — Reliable whole-home Wi-Fi 7 coverage ensures strong, stable connections for video conferencing and cloud applications in any room. Smart Home & IoT Devices — Connect dozens of smart speakers, cameras, sensors, and appliances across dedicated bands without impacting performance for primary devices. Technical Specifications Specification Details Wi-Fi Standard Wi-Fi 7 (IEEE 802.11be/ax/ac/n/g/b/a) Wi-Fi Speed BE9300 — 2.4 GHz: 688 Mbps | 5 GHz: 2882 Mbps | 6 GHz: 5765 Mbps Wi-Fi Bands Tri-Band (2.4 GHz + 5 GHz + 6 GHz) Key Wi-Fi 7 Features MLO, 4K-QAM, 320 MHz Channel, OFDMA, MU-MIMO Backhaul Dedicated 6 GHz Wireless Backhaul 2.5G Ports 1× 2.5G WAN + 1× 2.5G LAN per unit Gigabit LAN Ports 1× Gigabit LAN per unit Connected Devices 200+ Processor Quad-Core 2.0 GHz CPU Memory 1 GB RAM / 512 MB Flash Security WPA3, WPA2, TP-Link HomeShield Roaming Seamless (802.11k/v/r) Management TP-Link Deco App (iOS & Android) Voice Assistant Amazon Alexa compatible Pack Contents 3× Deco BE68 Units, 3× Power Adapters, 1× Ethernet Cable, Quick Start Guide Warranty 3 Years (TP-Link Australia) Recommended Accessories TP-Link Deco BE68 1-Pack — Expand your existing Deco BE68 mesh system with an additional unit to extend Wi-Fi 7 coverage to garages, granny flats, or large outdoor entertaining areas. TP-Link Archer GE400 — Wi-Fi 7 gaming router for households wanting a dedicated gaming router alongside their Deco mesh setup. TP-Link TL-SG105 — 5-Port Gigabit Desktop Switch for adding wired connections to a Deco unit in a home office or entertainment area. TP-Link Tapo TC90 — Wire-free 2K outdoor security camera to pair with your Deco BE68 network for whole-home security coverage. Downloads Deco BE68 Datasheet & Specifications (TP-Link AU) Firmware & Quick Installation Guide Downloads Frequently Asked Questions What is Wi-Fi 7 and how is it better than Wi-Fi 6E? Wi-Fi 7 (802.11be) builds on Wi-Fi 6E by introducing Multi-Link Operation (MLO), which allows devices to simultaneously transmit and receive data across multiple bands at once. This results in significantly lower latency, higher peak throughput, and more reliable connections compared to Wi-Fi 6E, which can only use one band at a time. Wi-Fi 7 also introduces 4K-QAM modulation and 320 MHz channel bandwidth on the 6 GHz band for even greater speeds. Do I need a Wi-Fi 7 device to benefit from the Deco BE68? No. The Deco BE68 is fully backwards compatible with Wi-Fi 6E, Wi-Fi 6, Wi-Fi 5, and older Wi-Fi standards. All your existing devices will connect and work normally. Wi-Fi 7 features such as MLO are only available to Wi-Fi 7-compatible client devices, but all devices benefit from the improved network management and reduced congestion the BE68 provides. Will the Deco BE68 work with my Australian NBN connection? Yes. The Deco BE68 is compatible with all major Australian NBN connection types including FTTP, FTTN, FTTB, FTTC, and HFC. The 2.5G WAN port on the primary Deco unit ensures you won’t be bottlenecked on NBN 1000 or full-fibre plans. How does the dedicated 6 GHz backhaul work? The Deco BE68 reserves the 6 GHz band exclusively for wireless communication between the two Deco units (backhaul). This means the high-speed inter-unit traffic does not compete with your devices on the 5 GHz or 2.4 GHz bands, resulting in significantly better real-world performance compared to mesh systems that share backhaul and client traffic on the same band. Can I add more Deco units to expand coverage? Yes. The Deco system is fully expandable. You can add additional Deco BE68 units or compatible Deco models at any time through the Deco app to extend coverage to additional areas of your home or property. Does the Deco BE68 replace my existing modem? The Deco BE68 functions as a router and mesh Wi-Fi system but does not include a built-in modem. For NBN connections that require a modem (such as FTTN or FTTB), you will need to keep your existing modem and connect the primary Deco unit to it via Ethernet. For FTTP connections, the Deco BE68 can connect directly to the NBN connection box.

Read more less

TP-Link Deco BE68 Wi-Fi 7 Mesh System — 2-Pack for Next-Generation Home Coverage The TP-Link Deco BE68 2-Pack delivers Wi-Fi 7 — the latest wireless standard — throughout your home with BE9300 tri-band speeds, Multi-Link Operation (MLO), and seamless whole-home mesh coverage. Designed for households that demand the absolute best in wireless performance, the Deco BE68 combines the speed of the 6 GHz band, the reliability of MLO, and the simplicity of the Deco app to create a network that’s fast, stable, and effortless to manage. Whether you’re on a high-speed NBN plan, running a smart home packed with devices, or simply tired of Wi-Fi dead zones, the BE68 is the upgrade your home deserves. Key Features Wi-Fi 7 (802.11be) Technology — The latest wireless standard with Multi-Link Operation (MLO), 4K-QAM, and 320 MHz channel bandwidth for dramatically faster speeds and lower latency than Wi-Fi 6E. BE9300 Tri-Band Speeds — Combined wireless throughput of up to 9300 Mbps across 2.4 GHz (688 Mbps), 5 GHz (2882 Mbps), and 6 GHz (5765 Mbps) bands. Multi-Link Operation (MLO) — Wi-Fi 7’s defining feature — simultaneously connects devices across multiple bands for lower latency, higher throughput, and improved reliability compared to single-band connections. Dedicated 6 GHz Backhaul — Reserves the high-speed 6 GHz band for inter-unit mesh backhaul, keeping the 5 GHz band fully available for client devices. 2.5G WAN & LAN Ports — Each unit includes 2.5 Gbps ports to fully utilise high-speed NBN 1000 and full-fibre connections without bottlenecking. Seamless Roaming — Automatically connects your devices to the strongest Deco unit as you move through your home, with no manual switching or dropped connections. 200+ Device Support — MU-MIMO and OFDMA efficiently manage large numbers of simultaneous connections across all bands. TP-Link HomeShield Security — Built-in network security with real-time threat detection, robust parental controls, and QoS traffic management via the Deco app. Easy Setup & Management — The TP-Link Deco app (iOS & Android) guides you through setup in minutes and provides ongoing network management from anywhere. Expandable Mesh System — Add more Deco BE68 or compatible Deco units at any time to extend coverage as your home or needs grow. Use Cases Large Homes & Multi-Storey Houses — Two Deco BE68 units blanket large homes with fast, consistent Wi-Fi 7 coverage across every floor and room. High-Speed NBN & Full-Fibre Connections — The 2.5G WAN port ensures you’re not bottlenecked on NBN 1000 or gigabit fibre plans. 4K & 8K Streaming — Deliver consistent high-bandwidth connections to smart TVs, streaming sticks, and media players throughout the home simultaneously. Online Gaming — MLO’s multi-band simultaneous connections deliver ultra-low latency for competitive gaming, even with other household members streaming or browsing. Work From Home — Reliable whole-home Wi-Fi 7 coverage ensures strong, stable connections for video conferencing and cloud applications in any room. Smart Home & IoT Devices — Connect dozens of smart speakers, cameras, sensors, and appliances across dedicated bands without impacting performance for primary devices. Technical Specifications Specification Details Wi-Fi Standard Wi-Fi 7 (IEEE 802.11be/ax/ac/n/g/b/a) Wi-Fi Speed BE9300 — 2.4 GHz: 688 Mbps | 5 GHz: 2882 Mbps | 6 GHz: 5765 Mbps Wi-Fi Bands Tri-Band (2.4 GHz + 5 GHz + 6 GHz) Key Wi-Fi 7 Features MLO, 4K-QAM, 320 MHz Channel, OFDMA, MU-MIMO Backhaul Dedicated 6 GHz Wireless Backhaul 2.5G Ports 1× 2.5G WAN + 1× 2.5G LAN per unit Gigabit LAN Ports 1× Gigabit LAN per unit Connected Devices 200+ Processor Quad-Core 2.0 GHz CPU Memory 1 GB RAM / 512 MB Flash Security WPA3, WPA2, TP-Link HomeShield Roaming Seamless (802.11k/v/r) Management TP-Link Deco App (iOS & Android) Voice Assistant Amazon Alexa compatible Pack Contents 2× Deco BE68 Units, 2× Power Adapters, 1× Ethernet Cable, Quick Start Guide Warranty 3 Years (TP-Link Australia) Recommended Accessories TP-Link Deco BE68 1-Pack — Expand your existing Deco BE68 mesh system with an additional unit to extend Wi-Fi 7 coverage to garages, granny flats, or large outdoor entertaining areas. TP-Link Archer GE400 — Wi-Fi 7 gaming router for households wanting a dedicated gaming router alongside their Deco mesh setup. TP-Link TL-SG105 — 5-Port Gigabit Desktop Switch for adding wired connections to a Deco unit in a home office or entertainment area. TP-Link Tapo TC90 — Wire-free 2K outdoor security camera to pair with your Deco BE68 network for whole-home security coverage. Downloads Deco BE68 Datasheet & Specifications (TP-Link AU) Firmware & Quick Installation Guide Downloads Frequently Asked Questions What is Wi-Fi 7 and how is it better than Wi-Fi 6E? Wi-Fi 7 (802.11be) builds on Wi-Fi 6E by introducing Multi-Link Operation (MLO), which allows devices to simultaneously transmit and receive data across multiple bands at once. This results in significantly lower latency, higher peak throughput, and more reliable connections compared to Wi-Fi 6E, which can only use one band at a time. Wi-Fi 7 also introduces 4K-QAM modulation and 320 MHz channel bandwidth on the 6 GHz band for even greater speeds. Do I need a Wi-Fi 7 device to benefit from the Deco BE68? No. The Deco BE68 is fully backwards compatible with Wi-Fi 6E, Wi-Fi 6, Wi-Fi 5, and older Wi-Fi standards. All your existing devices will connect and work normally. Wi-Fi 7 features such as MLO are only available to Wi-Fi 7-compatible client devices, but all devices benefit from the improved network management and reduced congestion the BE68 provides. Will the Deco BE68 work with my Australian NBN connection? Yes. The Deco BE68 is compatible with all major Australian NBN connection types including FTTP, FTTN, FTTB, FTTC, and HFC. The 2.5G WAN port on the primary Deco unit ensures you won’t be bottlenecked on NBN 1000 or full-fibre plans. How does the dedicated 6 GHz backhaul work? The Deco BE68 reserves the 6 GHz band exclusively for wireless communication between the two Deco units (backhaul). This means the high-speed inter-unit traffic does not compete with your devices on the 5 GHz or 2.4 GHz bands, resulting in significantly better real-world performance compared to mesh systems that share backhaul and client traffic on the same band. Can I add more Deco units to expand coverage? Yes. The Deco system is fully expandable. You can add additional Deco BE68 units or compatible Deco models at any time through the Deco app to extend coverage to additional areas of your home or property. Does the Deco BE68 replace my existing modem? The Deco BE68 functions as a router and mesh Wi-Fi system but does not include a built-in modem. For NBN connections that require a modem (such as FTTN or FTTB), you will need to keep your existing modem and connect the primary Deco unit to it via Ethernet. For FTTP connections, the Deco BE68 can connect directly to the NBN connection box.

Read more less

TP-Link Deco X50-PoE AX3000 Wi-Fi 6 Mesh Node with PoE & 2.5G Port (1-Pack) The TP-Link Deco X50-PoE is an AX3000 dual-band Wi-Fi 6 mesh node purpose-built for professional and residential installations across Australia where clean, cable-free deployment is essential. Powered entirely via a single PoE Ethernet cable — no power outlet required at the mounting point — it can be ceiling-mounted, wall-mounted, or placed on a desk, making it the ideal choice for offices, hospitality venues, schools, and homes where aesthetics and flexibility matter. A 2.5G multi-gigabit port breaks through the 1Gbps wired bottleneck, and AI-driven mesh intelligence ensures seamless roaming across all Deco nodes with a single Wi-Fi name. Key Features AX3000 Wi-Fi 6 (802.11ax) — Up to 2402Mbps on 5GHz and 574Mbps on 2.4GHz for combined wireless throughput of 3000Mbps — fast enough for 8K streaming, cloud gaming, and dozens of simultaneous devices. PoE Powered — Powered via a single Ethernet cable (PoE) from a compatible PoE switch or injector — no power outlet required at the installation point, enabling clean ceiling and wall mounting without visible cabling. 2.5G Multi-Gigabit Port — Breaks through the 1Gbps wired bottleneck for backhaul or wired device connections; also supports standard Gigabit speeds for backward compatibility. 1 × Gigabit LAN Port — Additional wired port for connecting a local device such as a smart TV, PC, or IP phone directly to the Deco node. Multiple Mounting Options — Ceiling mount, wall mount, junction box mount, or desktop placement using the included adaptive accessories — suits any installation scenario. AI-Driven Mesh — Intelligently learns your network environment and automatically optimises connections for the strongest possible signal at all times. Seamless Roaming — All Deco nodes share a single SSID; devices automatically connect to the nearest and strongest node as you move through the building. TP-Link HomeShield — Real-time network threat detection, IoT device protection, robust parental controls, and QoS bandwidth prioritisation. Universal Compatibility — Works with any NBN modem, ISP, or internet connection type; backward compatible with all Wi-Fi generations. Voice Control — Compatible with Amazon Alexa and Google Assistant for hands-free network management. Deco App Management — Set up and manage your entire mesh network from the Deco app (iOS & Android) in minutes. Use Cases Offices and commercial spaces requiring ceiling-mounted Wi-Fi 6 nodes powered cleanly via PoE without visible power cabling Hotels, serviced apartments, and hospitality venues needing per-floor or per-zone mesh Wi-Fi with a single unified SSID Schools and education facilities deploying PoE-powered Wi-Fi 6 nodes from a central PoE switch without electrician involvement Australian homes on NBN 250+ plans needing a mesh node that can handle multi-gigabit backhaul via the 2.5G port Retail stores and warehouses requiring flexible ceiling or wall mounting with no power outlet at the mounting point Expanding an existing Deco mesh system with an additional PoE-capable node for hard-to-reach areas Technical Specifications Specification Detail Model Deco X50-PoE (1-Pack) Wi-Fi Standard Wi-Fi 6 (IEEE 802.11ax/ac/n/a on 5GHz; 802.11ax/n/b/g on 2.4GHz) Combined Speed AX3000 — 2402Mbps (5GHz) + 574Mbps (2.4GHz) Wired Ports 1 × 2.5G RJ45 + 1 × Gigabit RJ45 Power Input PoE (802.3at recommended) or DC power adapter (included) Mounting Options Ceiling, wall, junction box, or desktop Mesh Technology TP-Link Deco AI Mesh (seamless roaming, single SSID) Security WPA3 / WPA2; TP-Link HomeShield (threat detection, parental controls, QoS, IoT protection) Voice Control Amazon Alexa, Google Assistant App TP-Link Deco (iOS & Android) Compatibility Works with all Deco models; compatible with any ISP/modem Weight Approx. 1.24 kg (including accessories) Warranty 2 Years Recommended Accessories TP-Link Deco X50-PoE (3-Pack) — For whole-home or whole-office mesh coverage, the 3-pack provides three nodes for larger deployments from a single purchase. TP-Link TL-SG105MPE 5-Port Gigabit PoE+ Smart Switch — Powers the Deco X50-PoE via PoE+ from a compact 5-port switch — ideal for small deployments of 1–4 nodes. TP-Link TL-SG3452XP 48-Port Gigabit PoE+ Managed Switch — For large-scale deployments powering multiple Deco X50-PoE nodes across a floor or building from a single rackmount switch. TP-Link TL-POE260S 2.5G PoE+ Injector — Powers a single Deco X50-PoE node from a non-PoE router or switch using a single Ethernet cable. Cat6 Ethernet Cable — Required for reliable PoE power delivery and 2.5G backhaul performance to the Deco node mounting point. Downloads Deco X50-PoE Datasheet (PDF) Frequently Asked Questions What PoE standard does the Deco X50-PoE require? TP-Link recommends IEEE 802.3at (PoE+, up to 30W) for reliable operation. The Deco X50-PoE also accepts DC power via the included power adapter if PoE is not available at the installation point. Check the datasheet for the exact power consumption figure to ensure your PoE switch or injector has sufficient budget. Can I mix the Deco X50-PoE with other Deco models in the same mesh? Yes. The Deco X50-PoE is compatible with all other TP-Link Deco models. You can mix and match Deco nodes — for example, using a Deco X50-PoE as a ceiling-mounted node in a hallway alongside a standard Deco X50 on a desk in the living room — and they will all operate as a single unified mesh network. Does the 2.5G port need to be used for PoE power? No. The 2.5G port and the PoE power input are separate. The Deco X50-PoE receives PoE power through its dedicated PoE input port (which also carries data). The 2.5G port can be used independently for wired backhaul to a 2.5G switch or for connecting a wired device at 2.5G speed. Is the Deco X50-PoE suitable for NBN 1000 plans? The Deco X50-PoE’s 2.5G port supports wired backhaul speeds beyond 1Gbps, making it well-suited for NBN 1000 plans when connected via the 2.5G port to a 2.5G-capable modem or switch. Wireless throughput in real-world conditions will vary; for maximum wireless performance on NBN 1000, ensure your client devices support Wi-Fi 6 and are within good range of the node. Can the Deco X50-PoE be used as a standalone access point without a Deco router? The Deco X50-PoE is designed to operate as part of a Deco mesh system. It can function as the primary Deco node (connected directly to your modem) or as a satellite node in an existing Deco mesh. It does not operate as a standalone access point in the traditional sense — a Deco app account and at least one primary Deco node are required for setup. Is HomeShield free? Basic HomeShield features including network scanning, simple parental controls, and new device notifications are available at no cost. Advanced features such as detailed content filtering, real-time threat intelligence, and comprehensive usage reports require a HomeShield Pro subscription, managed through the Deco app.

Read more less

TP-Link Deco M4 Mesh Wi-Fi System – AC1200 Dual-Band | 1-Pack Overview The TP-Link Deco M4 is a whole-home mesh Wi-Fi system that eliminates dead zones and delivers fast, seamless wireless coverage throughout your home or small office. A single Deco M4 unit covers up to 180m², with speeds of up to 1,167Mbps across dual-band AC1200 Wi-Fi. Multiple units work together as one unified network — your devices automatically roam to the strongest Deco as you move through your space, with no manual switching required. Simple to set up via the Deco app, it is compatible with all major Australian ISPs and modems. Key Features Seamless Whole-Home Mesh Coverage – TP-Link Mesh Technology links Deco units into a single unified network with one Wi-Fi name; devices roam automatically for the fastest connection. Up to 180m² Coverage Per Unit – One Deco M4 covers up to 180m²; add more units anytime to extend coverage across larger homes. AC1200 Dual-Band Wi-Fi – Combined speeds of up to 1,167Mbps across 2.4GHz and 5GHz bands for fast, stable connections throughout your home. Supports Up to 100 Devices – Handles busy networks with lag-free connections for smartphones, tablets, smart TVs, IoT devices, and more. Router & Access Point Modes – Flexible 2-in-1 operation; use as a standalone router or as an access point within an existing network. Ethernet Backhaul Support – Optional wired backhaul between Deco units for even faster inter-unit speeds and more reliable coverage. Parental Controls – Set screen time limits and block inappropriate websites with per-profile controls via the Deco app. Easy Setup via Deco App – Step-by-step guided setup on iOS and Android; manage your network from anywhere. Expandable & Compatible – Works with all other Deco models; expand your mesh network anytime by adding more units. ISP Compatible – Works with all major Australian internet service providers and modems. Use Cases Homes with Wi-Fi dead zones, thick walls, or multiple storeys Renters and homeowners who want simple plug-and-play whole-home Wi-Fi Small offices and home offices requiring reliable coverage for multiple devices Households with heavy streaming, gaming, or smart home device usage Replacing an ageing single router with a scalable mesh system Technical Specifications Specification Details Model Deco M4 (1-Pack) Wi-Fi Standard AC1200 Dual-Band (802.11ac) Max Speed Up to 1,167Mbps (400Mbps 2.4GHz + 867Mbps 5GHz) Coverage (1-Pack) Up to 180m² Device Capacity Up to 100 Devices Bands 2.4GHz & 5GHz Backhaul Wireless or Ethernet (Optional) Operating Modes Router / Access Point Parental Controls Yes (via Deco App) App Deco App (iOS & Android) ISP Compatibility All Major Australian ISPs Mesh Compatibility All Deco Models Downloads TP-Link Deco M4 Datasheet (PDF) Frequently Asked Questions Can I use just one Deco M4 unit, or do I need multiple? A single Deco M4 unit covers up to 180m² and works as a standalone router. If your home is larger or has areas with weak signal, you can add additional Deco units at any time to extend coverage — they all work together as one seamless network. Does the Deco M4 work with my Australian ISP? Yes. The Deco M4 is compatible with all major Australian internet service providers including Telstra, Optus, TPG, Aussie Broadband, and others. It works with standard NBN modems and routers in both router and access point modes. What is the difference between router mode and access point mode? In router mode, the Deco M4 connects directly to your modem and manages your home network including DHCP and NAT. In access point mode, it connects to an existing router and extends Wi-Fi coverage without replacing your current network setup. Both modes are configured via the Deco app. Can I mix Deco M4 units with other Deco models? Yes. The Deco M4 is compatible with all other Deco models, so you can mix and match units to build or expand your mesh network as needed. Does the Deco M4 support wired backhaul between units? Yes. While Deco units connect wirelessly by default, you can use Ethernet cables between units for a wired backhaul connection, which provides faster and more reliable inter-unit speeds — particularly useful in larger homes or multi-storey installations. How do I set up the Deco M4? Download the free Deco app on iOS or Android and follow the step-by-step guided setup. Most users are up and running in under 10 minutes. No technical knowledge is required. Installation Tip: For the best mesh performance in a multi-unit setup, position each Deco unit within a reasonable range of the next — not too close (overlapping coverage) and not too far (weak backhaul signal). A general guide is one unit per floor or one unit per 180m² of floor space.

Read more less

TP-Link Deco BE65 Pro — Wi-Fi 7 Mesh for Demanding Homes & Businesses The Deco BE65 Pro brings Wi-Fi 7 technology to whole-home and small-business environments, delivering tri-band BE9300 speeds, a built-in 10 Gbps port, and seamless roaming across every room. Whether you're running a smart home, a home office, or a multi-device household, the BE65 Pro is engineered to keep every connection fast and stable. Key Features Wi-Fi 7 (802.11be) Tri-Band: Up to 688 Mbps (2.4 GHz) + 2882 Mbps (5 GHz) + 5765 Mbps (6 GHz) — total BE9300 throughput. 10 Gbps WAN/LAN Port: Future-proof wired connectivity for NBN HFC, fibre, or multi-gig switches. MLO (Multi-Link Operation): Wi-Fi 7's flagship feature — simultaneously transmits across multiple bands for lower latency and higher reliability. 4K QAM: 20% more data per transmission compared to Wi-Fi 6E's 1024 QAM. Seamless Roaming: Intelligent mesh ensures devices hand off between Deco nodes without dropping connections. Wired & Wireless Backhaul: Supports both Ethernet and wireless backhaul for flexible deployment. TP-Link HomeShield: Built-in network security, parental controls, and real-time threat protection (subscription optional for advanced features). Easy Setup via Deco App: iOS and Android app-guided setup in minutes — no technical expertise required. Matter & Thread Ready: Native smart home protocol support for a unified IoT ecosystem. Use Cases Large Homes: Eliminate dead zones across multi-storey or sprawling single-level homes. Home Offices: Stable, low-latency Wi-Fi for video conferencing, cloud applications, and VPNs. High-Device Households: Supports 200+ simultaneous devices without performance degradation. Smart Home Hubs: Matter and Thread support simplifies management of IoT devices across the network. SMB Deployments: Installers can deploy scalable mesh coverage across small offices, retail spaces, and hospitality venues. Specifications Specification Detail Wi-Fi Standard Wi-Fi 7 (IEEE 802.11be/ax/ac/n/g/b/a) Wi-Fi Speed BE9300 — 688 + 2882 + 5765 Mbps Frequency Bands 2.4 GHz / 5 GHz / 6 GHz (Tri-Band) Ports 1× 10 Gbps WAN/LAN, 1× 2.5 Gbps WAN/LAN, 1× 1 Gbps LAN Antennas 4× Internal Antennas MU-MIMO 4×4 (2.4 GHz) / 4×4 (5 GHz) / 4×4 (6 GHz) Processor Quad-Core 2.0 GHz CPU Memory 1 GB RAM / 512 MB Flash Bluetooth Bluetooth 5.0 (for setup) Power AC/DC Power Adapter (AU plug) Dimensions 130 × 130 × 230 mm (per unit) Certifications RCM (Australia/NZ), FCC, CE Warranty 3 Years (Australian warranty) Official Videos Watch: Deco BE65 Pro Overview & Setup Guide (TP-Link Official) Recommended Accessories TP-Link TL-SX105 — 5-Port 10G Desktop Switch (ideal for wired backhaul) TP-Link Deco BE65 Pro Add-on Node (expand coverage) TP-Link RE900XD — AXE11000 Wi-Fi 6E Range Extender (legacy zone bridging) TP-Link UB500 — Bluetooth 5.0 USB Adapter (for PC connectivity) Downloads Deco BE65 Pro Datasheet (PDF) — TP-Link AU Quick Installation Guide (PDF) Frequently Asked Questions What is Wi-Fi 7 and do I need it? Wi-Fi 7 (802.11be) is the latest wireless standard, offering significantly higher speeds, lower latency, and Multi-Link Operation (MLO) compared to Wi-Fi 6E. If you have a high-device household, run a home office, or stream 4K/8K content, Wi-Fi 7 provides a meaningful upgrade in real-world performance. Is the Deco BE65 Pro compatible with my existing NBN connection? Yes. The BE65 Pro works with all NBN connection types — FTTP, HFC, FTTN, FTTB, and Fixed Wireless. The 10 Gbps port is ready for multi-gig NBN plans as they become available across Australia. How many Deco nodes do I need? A 2-pack typically covers homes up to approximately 500 m². For larger properties or multi-storey buildings, additional nodes can be added to the mesh at any time via the Deco app. Can I use the Deco BE65 Pro in Access Point mode? Yes. The BE65 Pro supports both Router mode and Access Point mode, making it suitable for deployments where an existing router or firewall is already in place — common in SMB and installer scenarios. Does it support wired backhaul between nodes? Yes. Ethernet backhaul is supported via the 2.5 Gbps or 10 Gbps ports, which is recommended for maximum throughput between nodes in professional installations. What security features are included? The Deco BE65 Pro includes WPA3 encryption, TP-Link HomeShield (basic tier free, Pro tier subscription-based), network segmentation via guest networks, and IoT network isolation.

Read more less

Whole-Home Wi-Fi 6E — Faster, Further, and Free from Interference The TP-Link Deco XE75 Pro is a tri-band Wi-Fi 6E mesh system that brings the latest 6 GHz wireless technology into your home. The 3-pack covers up to 670 m², making it ideal for large homes, multi-storey properties, and environments where walls and obstacles have historically defeated standard routers. With a dedicated 6 GHz backhaul between Deco nodes, all three bands work simultaneously to deliver AXE5400 combined speeds to up to 200 devices — with seamless roaming, intelligent band steering, and TP-Link HomeShield security built in. Key Features Wi-Fi 6E with 6 GHz Band — Access the brand-new 6 GHz frequency, free from interference from legacy 2.4 GHz and 5 GHz devices. Ideal for high-bandwidth applications including 4K/8K streaming, VR, and low-latency gaming AXE5400 Tri-Band Speed — Combined wireless speeds up to 5,400 Mbps across three simultaneous bands (6 GHz + 5 GHz + 2.4 GHz) for up to 200 connected devices Dedicated 6 GHz Backhaul — The 6 GHz band serves as a high-speed dedicated backhaul between Deco nodes, keeping the 5 GHz and 2.4 GHz bands free for client devices and maximising overall throughput 670 m² Coverage (3-Pack) — Three Deco XE75 Pro units work together to blanket large homes, multi-level properties, and challenging layouts with strong, consistent Wi-Fi 2.5G WAN/LAN Port — Takes full advantage of high-speed broadband connections; also supports two additional Gigabit Ethernet ports for wired devices AI-Driven Mesh — Intelligent algorithms automatically steer devices to the optimal band and node as you move through your home, maintaining the fastest possible connection at all times Seamless Roaming — One Wi-Fi name and password across your entire home; your devices connect automatically to the nearest and strongest Deco node without interruption BSS Colouring & Beamforming — Reduces interference between overlapping networks and focuses signal toward connected devices for improved range and reliability TP-Link HomeShield — Built-in network security with real-time IoT device protection, parental controls, content filtering, and comprehensive network usage reports Universal Compatibility — Works with any modem, ISP, or internet connection type; backward compatible with all previous Wi-Fi generations (Wi-Fi 4/5/6) Alexa Voice Control — Pair with Amazon Alexa for hands-free network management via voice commands Expandable Mesh — Compatible with all other Deco models; add more nodes at any time to extend coverage further Deco App Management — Simple guided setup and ongoing management from the Deco app on iOS or Android; monitor devices, set priorities, and create guest networks from anywhere Typical Use Cases Large homes (4+ bedrooms, 400–670 m²) where a single router cannot reach all areas reliably Multi-storey houses where floors, ceilings, and concrete walls block Wi-Fi signal between levels Households with 20+ connected devices including smart TVs, gaming consoles, laptops, smart home devices, and IP cameras Home offices requiring low-latency, high-throughput wireless for video conferencing, large file transfers, and cloud applications 4K/8K streaming households and gamers who need the interference-free 6 GHz band for consistent performance Families requiring HomeShield parental controls and IoT device protection across a large, device-dense network Technical Specifications Specification Detail Model Deco XE75 Pro (3-Pack) Wi-Fi Standard Wi-Fi 6E (IEEE 802.11ax) — 2.4 GHz, 5 GHz, 6 GHz Combined Speed AXE5400 (up to 5,400 Mbps total) Bands Tri-Band: 2.4 GHz + 5 GHz + 6 GHz 6 GHz Channel Width Up to 160 MHz Backhaul Dedicated 6 GHz wireless backhaul Coverage (3-Pack) Up to 670 m² Device Capacity Up to 200 devices Ethernet Ports (per unit) 1× 2.5G WAN/LAN + 2× Gigabit LAN Wi-Fi Technologies OFDMA, MU-MIMO, Beamforming, BSS Colouring, AI Band Steering Security Suite TP-Link HomeShield (IoT protection, parental controls, network reports) Voice Control Amazon Alexa ISP Compatibility Universal (works with any modem or ISP) Backward Compatibility Wi-Fi 4 / Wi-Fi 5 / Wi-Fi 6 devices Management App Deco App (iOS & Android) Mesh Compatibility All Deco models Weight (3-Pack) 3.02 kg Barcode (EAN) 4897098684993 SKU DECO XE75 PRO(3-PACK) Frequently Asked Questions What makes Wi-Fi 6E different from Wi-Fi 6? Wi-Fi 6E extends Wi-Fi 6 technology into the 6 GHz frequency band, which is currently free from congestion caused by legacy Wi-Fi 4 and Wi-Fi 5 devices. This means less interference, wider 160 MHz channels, and consistently faster speeds for 6E-capable devices such as recent smartphones, laptops, and tablets. Do all three units need to be plugged into my router? No. Only one Deco XE75 Pro unit connects to your modem or router via Ethernet. The remaining two units connect wirelessly via the dedicated 6 GHz backhaul, or optionally via Ethernet cable for maximum performance. Place them throughout your home to extend coverage. Will the 6 GHz band work with my existing devices? The 6 GHz band is only accessible to Wi-Fi 6E-capable devices (most flagship smartphones and laptops released from 2021 onwards). Older devices will automatically connect to the 5 GHz or 2.4 GHz bands as normal — the Deco XE75 Pro is fully backward compatible with all Wi-Fi generations. Can I use the 2.5G port with my NBN connection? Yes. The 2.5G WAN port allows you to take full advantage of high-speed NBN plans (such as NBN 1000) that exceed standard Gigabit speeds. Connect your NBN modem or ONT to the 2.5G port on the primary Deco unit for maximum wired throughput. Is the Deco XE75 Pro compatible with other Deco models I already own? Yes. The Deco XE75 Pro is compatible with all other Deco models and can be added to an existing Deco mesh network, or existing Deco units can be added to an XE75 Pro network. All units are managed together from the single Deco app. What is TP-Link HomeShield and does it cost extra? HomeShield is TP-Link’s built-in network security suite providing real-time IoT protection, parental controls with content filtering and screen time limits, and network usage reports. Basic HomeShield features are included at no cost. HomeShield Pro, which unlocks advanced features, is available via an optional subscription.

Read more less

One Device. Modem, Router, and Whole-Home Mesh Wi-Fi 6 — All in One The TP-Link Deco X73-DSL is a whole-home Wi-Fi 6 mesh system with a built-in VDSL2 modem, purpose-built for Australian NBN FTTN and FTTB connections. It replaces your separate modem and router in a single unit, delivering AX5400 wireless speeds across every room while supporting downstream speeds up to 350 Mbps via VDSL2 Profile 35b. Expand coverage at any time by adding more Deco nodes to the mesh. Key Features Built-in VDSL2 Modem — Connects directly to your phone line for NBN FTTN and FTTB services; supports Profile 35b with downstream speeds up to 350 Mbps. Also compatible with ADSL and ADSL2+ AX5400 Wi-Fi 6 — 4804 Mbps on 5 GHz and 574 Mbps on 2.4 GHz for fast, low-latency wireless across all your devices Seamless Mesh Roaming — Automatically hands your device to the strongest Deco node as you move through your home, with no drop in connection 4× Gigabit Ethernet Ports — Flexible WAN/LAN configuration for wired devices including smart TVs, NVRs, gaming consoles, and desktop PCs 2× FXS Ports + 1× DSL Port — Connect up to two standard analogue phones directly without a separate VoIP adapter OFDMA & MU-MIMO — Serves multiple devices simultaneously with reduced latency, ideal for busy households Beamforming — Focuses wireless signal toward connected clients to extend effective range and improve throughput 4× Internal Antennas — Signal-boosting array covers more directions and larger areas for consistent whole-home coverage TP-Link HomeShield — Real-time IoT device protection, parental controls with content filtering and screen time scheduling, and comprehensive network usage reports Optional Ethernet Backhaul — Wire Deco units together for maximum mesh performance and dedicated backhaul bandwidth Flexible Working Modes — DSL modem router, standard router, or access point to suit your existing setup Deco App — Simple setup and ongoing management from your iOS or Android device Typical Use Cases NBN FTTN or FTTB households replacing an ageing modem router with a single modern unit 1–3 bedroom homes needing whole-home Wi-Fi 6 coverage up to 270 m² Families requiring parental controls and IoT security via HomeShield Home offices with wired workstations, NAS drives, or IP cameras needing Gigabit LAN ports Households retaining an existing landline phone service via the built-in FXS ports Existing Deco mesh networks adding a VDSL modem-capable entry node Technical Specifications Specification Detail Model Deco X73-DSL (1-Pack) Wi-Fi Standard Wi-Fi 6 (IEEE 802.11ax/ac/n/a 5 GHz; 802.11ax/n/b/g 2.4 GHz) Wi-Fi Speed AX5400: 4804 Mbps (5 GHz) + 574 Mbps (2.4 GHz) Wi-Fi Bands Dual-Band (2.4 GHz + 5 GHz) Streams 4 streams Modem Type VDSL2 Profile 35b / ADSL / ADSL2+ Max DSL Speed Up to 350 Mbps downstream (Profile 35b) Ethernet Ports 4× Gigabit WAN/LAN RJ45 Phone Ports 2× FXS (RJ11) + 1× DSL (RJ11) Antennas 4× internal Wi-Fi Technologies OFDMA, MU-MIMO, Beamforming, BSS Colour Working Modes DSL Modem Router / Router / Access Point Coverage (1-Pack) Up to 270 m² (1–3 bedroom homes) Security Suite TP-Link HomeShield (IoT protection, parental controls, network reports) Management App Deco App (iOS & Android) Weight 1.74 kg (unit + accessories) Barcode (EAN) 6935364072872 SKU Deco X73-DSL(1-pack) What’s in the Box 1× Deco X73-DSL unit 1× RJ45 Ethernet cable 2× RJ11 DSL cables 1× External DSL splitter 1× Power adapter 1× Telephony feature guide Quick installation guide Frequently Asked Questions Is the Deco X73-DSL compatible with Australian NBN FTTN and FTTB services? Yes. The built-in VDSL2 modem connects directly to your phone line and is fully compatible with NBN FTTN (Fibre to the Node) and FTTB (Fibre to the Building) connection types. It also supports legacy ADSL and ADSL2+ services. Do I still need a separate modem? No. The Deco X73-DSL replaces both your existing modem and router in a single unit, simplifying your setup and reducing the number of devices in your home. Can I keep my existing landline phone? The Deco X73-DSL includes two FXS ports for connecting standard analogue phones. Whether you can retain your existing number depends on your NBN provider’s VoIP service — confirm with your ISP before purchasing if landline continuity is important. Can I expand coverage beyond 270 m²? Yes. Additional Deco nodes (such as the Deco X50 or Deco XE75) connect to the X73-DSL via wireless mesh or optional Ethernet backhaul to extend coverage throughout larger homes. What is TP-Link HomeShield? HomeShield is TP-Link’s built-in network security suite offering real-time IoT device protection, parental controls with content filtering and screen time limits, and detailed network usage reports. Basic features are free; HomeShield Pro unlocks advanced capabilities via subscription. Does it support Ethernet backhaul between Deco units? Yes. Running Ethernet cable between Deco units enables wired backhaul, which frees up wireless bandwidth for client devices and significantly improves overall mesh performance. What NBN connection types does it NOT support? The Deco X73-DSL is not compatible with NBN FTTP (Fibre to the Premises), FTTC (Fibre to the Curb), HFC (cable), or Fixed Wireless connections. For those connection types, you will need a standard router without a built-in DSL modem.

Read more less

TP-Link Deco X20 (2-Pack) AX1800 Whole Home Mesh Wi-Fi 6 System Wi-Fi 6 Mesh Coverage for the Whole Home — Up to 370 m² The TP-Link Deco X20 2-pack is an AX1800 dual-band Wi-Fi 6 mesh system that delivers fast, seamless wireless coverage across your entire home. Two Deco units combine to cover up to 370 m² under a single network name, with Wi-Fi 6 technologies including OFDMA, MU-MIMO, and BSS Colouring ensuring more devices connect faster with lower latency. Managed via the Deco app, it’s an ideal upgrade for Australian households with multiple users and smart devices. Key Features Wi-Fi 6 (802.11ax) dual-band — 1,201 Mbps @ 5 GHz + 574 Mbps @ 2.4 GHz (AX1800) 2-pack covers up to 370 m² — expandable by adding more Deco units at any time OFDMA and MU-MIMO — quadruple capacity for simultaneous transmission to more devices BSS Colouring — reduces interference from neighbouring Wi-Fi networks Ultra-low latency — ideal for gaming, video calls, and real-time applications Seamless roaming — single SSID with auto band and AP steering as you move through your home WPA3 encryption for enhanced wireless security TP-Link HomeCare — parental controls, antivirus, and QoS built in Optional Ethernet backhaul for maximum inter-unit performance Qualcomm 1 GHz quad-core CPU for smooth, responsive performance 2 × Gigabit LAN/WAN ports per unit Setup via the Deco app (iOS & Android) — step-by-step guided installation Use Cases Medium to Large Homes: Eliminate Wi-Fi dead zones across multi-storey homes, homes with thick walls, or properties up to 370 m². High-Device Households: Wi-Fi 6’s OFDMA technology handles dozens of simultaneous connections — smartphones, tablets, smart TVs, cameras, and IoT devices all at once. Gamers & Streamers: Ultra-low latency and fast 5 GHz speeds keep gaming and 4K streaming smooth even with multiple users online. Families: HomeCare parental controls let you manage screen time and content filtering per device or profile. Home Offices: Reliable, low-latency Wi-Fi for video conferencing and large file transfers throughout the home. Specifications Specification Detail Model Deco X20 (2-Pack) Wi-Fi Standard Wi-Fi 6 (802.11ax) — AX1800 Dual-Band Wireless Speeds 1,201 Mbps @ 5 GHz + 574 Mbps @ 2.4 GHz Coverage (2-Pack) Up to 370 m² Processor Qualcomm 1 GHz Quad-Core LAN/WAN Ports 2 × Gigabit per unit Antennas 4 × internal per unit Wi-Fi Technologies OFDMA, MU-MIMO, BSS Colour, Beamforming, 1024-QAM Mesh Features Auto Path Selection, Self-Healing, AP Steering, Band Steering Backhaul Wireless or optional Ethernet Security WPA3, WPA2-PSK, WPA-PSK HomeCare Parental controls, antivirus, QoS App Deco App (iOS & Android) Dimensions (per unit) Ø110 × 114 mm Weight (2-pack) 2.14 kg Frequently Asked Questions What is the difference between Wi-Fi 6 and Wi-Fi 5? Wi-Fi 6 (802.11ax) introduces OFDMA and MU-MIMO improvements that allow more devices to communicate simultaneously without congestion. It also delivers higher speeds, lower latency, and better performance in dense environments compared to Wi-Fi 5 (802.11ac). Wi-Fi 6 devices benefit most, but older Wi-Fi 5 and Wi-Fi 4 devices remain fully compatible. How many Deco X20 units do I need? The 2-pack covers up to 370 m², which suits most Australian homes. For larger properties or homes with challenging layouts, simply add a 1-pack or additional 2-pack to extend coverage — all units join the same mesh network automatically. Does the Deco X20 work with my Australian ISP? Yes. The Deco X20 is compatible with major Australian ISPs including Telstra, Optus, TPG, Aussie Broadband, and iiNet, and supports NBN FTTP, FTTN, FTTB, HFC, and fixed wireless connections. What is Ethernet backhaul and should I use it? Ethernet backhaul connects Deco units via a wired Ethernet cable instead of wirelessly. This dedicates the full wireless bandwidth to your devices rather than sharing it with the inter-unit connection, resulting in better performance — especially in larger homes. It’s optional but recommended where cabling is practical. What is TP-Link HomeCare? HomeCare is TP-Link’s built-in security and management suite that includes parental controls (per-device content filtering and time limits), antivirus protection powered by Trend Micro, and QoS for prioritising specific devices or applications. Basic features are included free with the Deco X20. Can I manage the Deco X20 remotely? Yes. The Deco app allows you to monitor connected devices, run speed tests, adjust parental controls, and manage your network from anywhere via your smartphone.

Read more less

Whole-Home Wi-Fi for Larger Australian Homes — Up to 370m²The TP-Link Deco E4 3-pack is a whole-home mesh Wi-Fi system that delivers seamless, fast wireless coverage throughout larger homes. Three Deco E4 units work together as a single unified network, automatically connecting your devices to the strongest unit as you move from room to room. With AC1200 dual-band speeds, support for up to 100 devices, and compatibility with all major Australian ISPs and NBN connection types, it’s a straightforward upgrade from a single router that can’t cover the whole home.Key Features Covers Up to 370m² — three Deco E4 units provide whole-home coverage for large Australian homes; add more Decos anytime to extend further AC1200 Dual-Band Wi-Fi — up to 1167Mbps combined across 2.4GHz and 5GHz bands Seamless Roaming — Deco Mesh Technology creates a single unified network; devices switch automatically to the nearest unit for the fastest connection Supports Up to 100 Devices — handles busy households with smartphones, tablets, smart TVs, IP cameras, and IoT devices simultaneously Parental Controls — set time limits and block inappropriate content for individual family members via the Deco app Works with Most Australian ISPs — compatible with NBN, ADSL, and cable modems from Telstra, Optus, TPG, and more Easy Setup via Deco App — guided step-by-step setup from your smartphone in minutes Expandable System — add additional Deco units to the same network at any time Typical Use Cases Large single-storey homes or multi-storey homes with Wi-Fi dead zones Homes with thick concrete, brick, or double-brick walls that block wireless signals Replacing a single router that can’t cover the whole property Family homes needing parental controls and guest network separation Providing reliable Wi-Fi for smart home devices, IP cameras, and streaming throughout the home Technical Specifications Specification Detail Model Deco E4 (3-pack) Wi-Fi Standard IEEE 802.11ac/n/a (5GHz), IEEE 802.11n/b/g (2.4GHz) Wi-Fi Speed AC1200: up to 1167Mbps combined Coverage (3-pack) Up to 370m² Max Connected Devices Up to 100 Ethernet Ports (per unit) 2× 10/100/1000Mbps Mesh Technology Deco Mesh (seamless roaming, single SSID) Management Deco App (iOS and Android) Security WPA/WPA2, Guest Network, Parental Controls WAN Connection Types Dynamic IP, Static IP, PPPoE, L2TP, PPTP Certifications CE, FCC, RoHS Warranty 3 Years Frequently Asked Questions What is the difference between the Deco E4 2-pack and 3-pack? The 3-pack includes an additional Deco E4 unit, extending coverage from approximately 260m² (2-pack) to approximately 370m². The 3-pack is better suited to larger homes, multi-storey properties, or homes with challenging layouts. Both packs use the same Deco E4 hardware and can be expanded further by adding more units. Does the Deco E4 work with Australian NBN connections? Yes. The Deco E4 supports PPPoE, Dynamic IP, Static IP, L2TP, and PPTP WAN connection types, covering all common NBN connection methods. Connect the primary Deco unit to your NBN modem or gateway via Ethernet. Do all three Deco units need to be connected via Ethernet? No. Only the primary Deco unit connects to your modem via Ethernet. The remaining units communicate wirelessly with the primary unit and only need a power outlet. For best performance, Ethernet backhaul between units is recommended where possible. Can I mix Deco E4 units with other Deco models? Yes. The Deco system supports mixing compatible Deco models on the same network. You can add higher-end Deco units (such as Wi-Fi 6 models) to your existing Deco E4 network via the Deco app to boost performance in specific areas. Does the Deco E4 replace my existing router? Yes. The primary Deco E4 unit acts as your router, connecting directly to your modem. You can disable your existing router’s Wi-Fi or put it in bridge/modem mode to avoid network conflicts.

Read more less

TP-Link Deco X20 3-Pack – AX1800 Whole Home Mesh Wi-Fi 6 System The TP-Link Deco X20 3-Pack is a Wi-Fi 6 (802.11ax) mesh system that blankets your entire home in fast, seamless wireless coverage. Three Deco X20 units work together to deliver up to 530 square metres of combined coverage, automatically routing your devices to the strongest signal as you move from room to room. With AX1800 dual band speeds, OFDMA, MU-MIMO, WPA3 security, and TP-Link HomeCare™ built in, it’s a significant upgrade over traditional routers and older mesh systems for Australian homes with multiple users and dozens of connected devices. Key Features Wi-Fi 6 (AX1800): 1201Mbps on 5GHz and 574Mbps on 2.4GHz for a combined 1800Mbps — faster and more efficient than Wi-Fi 5 (AC) systems. Up to 530sqm Coverage: Three units provide whole-home mesh coverage suitable for large Australian homes, multi-storey residences, and open-plan layouts. OFDMA Technology: Orthogonal Frequency Division Multiple Access allows simultaneous data transmission to multiple devices, quadrupling network capacity compared to Wi-Fi 5. MU-MIMO: Multi-User Multiple Input Multiple Output enables multiple devices to receive data simultaneously rather than sequentially, reducing wait times under load. Seamless Roaming (802.11k/v/r): Devices automatically connect to the nearest Deco unit as you move around your home without dropping the connection or requiring manual switching. WPA3 Security: The latest Wi-Fi security standard provides stronger encryption and protection against brute-force attacks compared to WPA2. TP-Link HomeCare™: Built-in suite including Parental Controls, Antivirus (powered by Trend Micro), and QoS for a safer, more controlled home network. 2 × Gigabit Ethernet Ports per Unit: Each Deco X20 has two 10/100/1000Mbps ports for wired device connections or wired backhaul between units. Router & Access Point Modes: Operates as a standalone router or as an access point behind an existing router or modem. IPv4 & IPv6 Support: Future-ready dual-stack IP protocol support. Deco App Setup: Step-by-step guided setup via the free Deco app on iOS or Android — no web interface required. Ultra-Low Latency: Wi-Fi 6 improvements reduce latency for more responsive gaming, video calls, and real-time applications. Ideal Use Cases Large Australian homes (200–530sqm) where a single router cannot provide reliable coverage throughout. Multi-storey residences with thick walls, concrete floors, or complex layouts that block Wi-Fi signals. Households with 20+ connected devices including smartphones, smart TVs, IoT devices, and laptops. Home offices requiring reliable, low-latency Wi-Fi for video conferencing and large file transfers. Families needing parental controls and content filtering via HomeCare™ without a separate subscription service. Replacing an ageing router and range extender setup with a unified, seamless mesh network. Technical Specifications Specification Detail (per unit) Model Deco X20 (3-Pack) Wi-Fi Standard IEEE 802.11ax/ac/n/a (5GHz), IEEE 802.11ax/n/g/b (2.4GHz) Wi-Fi Speed (5GHz) Up to 1201Mbps (Wi-Fi 6) Wi-Fi Speed (2.4GHz) Up to 574Mbps (Wi-Fi 6) Combined Speed AX1800 (1201 + 574Mbps) Coverage (3-Pack) Up to 530 sqm Mesh Protocol 802.11k/v/r (seamless roaming) OFDMA Yes (2.4GHz & 5GHz) MU-MIMO Yes Ethernet Ports 2 × 10/100/1000Mbps RJ45 per unit Antenna 4 × Internal Omni-Directional Wireless Security WPA / WPA2-PSK / WPA3 Working Modes Router / Access Point WAN Types Dynamic IP / Static IP / PPPoE / L2TP / PPTP IP Protocols IPv4 & IPv6 Firewall SPI Firewall HomeCare™ Parental Controls, Antivirus (Trend Micro), QoS Power Consumption 13.5W max per unit Power Adapter Input: 100–240V / 50–60Hz; Output: 12V / 1.5A Dimensions (per unit) 110 × 110 × 114 mm Weight (3-Pack) 2.44kg Management App Deco (iOS & Android) SKU Deco X20(3-pack) Barcode (EAN) 6935364086947 What’s in the Box 3 × Deco X20 Wi-Fi 6 Units 3 × Power Adapters 1 × RJ45 Ethernet Cable Quick Start Guide Frequently Asked Questions What is the difference between the Deco X20 and a standard Wi-Fi router? A standard router broadcasts from a single point, leaving dead zones in larger homes. The Deco X20 3-Pack uses three units working together as a mesh network, providing seamless coverage across up to 530sqm with automatic handoff between units as you move around your home. Can I add more Deco units to expand coverage further? Yes. Additional Deco X20 units (or other compatible Deco models) can be added to the mesh network via the Deco app to extend coverage beyond 530sqm. Does the Deco X20 work with my existing NBN modem? Yes. In Router mode, connect the primary Deco X20 to your NBN modem or gateway via Ethernet. It supports Dynamic IP, Static IP, PPPoE, L2TP, and PPTP WAN types, covering all common Australian NBN connection types. What is TP-Link HomeCare™ and does it cost extra? HomeCare™ is TP-Link’s built-in security and management suite, including Parental Controls, Antivirus powered by Trend Micro, and QoS. It is included with the Deco X20 at no additional subscription cost. Does Wi-Fi 6 require Wi-Fi 6 devices to work? No. The Deco X20 is backward compatible with all Wi-Fi 5 (802.11ac), Wi-Fi 4 (802.11n), and older devices. Wi-Fi 6 features such as OFDMA and improved efficiency are available to Wi-Fi 6 capable devices, while older devices connect normally at their supported speeds. Can I use the Deco X20 in Access Point mode behind my existing router? Yes. In Access Point mode, the Deco X20 connects to your existing router via Ethernet and provides mesh Wi-Fi coverage without replacing your current router’s routing and DHCP functions. Is wired backhaul supported between Deco units? Yes. Each Deco X20 has two Gigabit Ethernet ports. You can connect units via Ethernet cable for wired backhaul, which provides faster and more reliable inter-unit communication than wireless backhaul — recommended for the best performance in larger deployments.

Read more less

TP-Link Deco M4 (2-Pack) AC1200 Whole Home Mesh Wi-Fi System Seamless Whole-Home Wi-Fi — No More Dead Zones The TP-Link Deco M4 2-pack is an AC1200 dual-band mesh Wi-Fi system designed to blanket your entire home in fast, reliable wireless coverage. Two Deco units work together to cover up to 260 m², supporting up to 100 connected devices with a single unified network name. As you move through your home, your devices automatically connect to the strongest Deco unit — no manual switching required. Key Features AC1200 dual-band mesh Wi-Fi — combined speeds up to 1167 Mbps 2-pack covers up to 260 m² — expandable by adding more Deco units at any time Deco Mesh Technology — single network name with seamless device roaming Supports up to 100 simultaneous connected devices Parental controls — set time limits and block inappropriate content per family member profile Compatible with major Australian ISPs and modem types Simple setup via the Deco app (iOS & Android) — step-by-step guided installation Works with Amazon Alexa for voice control Use Cases Medium to Large Homes: Eliminate Wi-Fi dead zones in multi-storey homes, homes with thick walls, or properties up to 260 m². Families: Use parental controls to manage screen time and restrict content for each child's profile independently. High-Device Households: Smartphones, tablets, smart TVs, security cameras, and smart home devices all connect reliably without congestion. Renters & Apartment Dwellers: Easy plug-and-play setup with no configuration expertise required — ideal for those who move frequently. Home Offices: Stable, lag-free connections for video conferencing and large file transfers throughout the home. Specifications Specification Detail Model Deco M4 (2-Pack) Wi-Fi Standard AC1200 Dual-Band (802.11ac) Combined Wi-Fi Speed Up to 1167 Mbps Coverage (2-Pack) Up to 260 m² Max Connected Devices Up to 100 Mesh Technology TP-Link Deco Mesh — single SSID, seamless roaming App Deco App (iOS & Android) Voice Control Amazon Alexa Parental Controls Yes — per-profile time limits & content filtering Expandable Yes — add more Deco units to extend coverage Weight 1.64 kg (2-pack) Package Contents 2 × Deco M4 units, 1 × RJ45 Ethernet cable, 2 × power adapters, quick installation guide Frequently Asked Questions How many Deco M4 units do I need for my home? The 2-pack covers up to 260 m², which suits most Australian homes. For larger properties, simply add a 1-pack or additional 2-pack to extend coverage — all units join the same mesh network automatically. Does the Deco M4 work with my Australian ISP? Yes. The Deco M4 is compatible with major Australian ISPs including Telstra, Optus, TPG, Aussie Broadband, and iiNet, and works with most standard modem and router setups including NBN connections. Do all Deco units need to be wired together? No. Only the primary Deco unit needs to be connected to your modem via Ethernet. Additional units communicate wirelessly using the mesh backhaul. For best performance, a wired backhaul connection between units is recommended where possible. Can I manage the network remotely? Yes. The Deco app allows you to monitor connected devices, adjust parental controls, run speed tests, and manage your network from anywhere via your smartphone. Is the Deco M4 compatible with other Deco models? Yes. The Deco M4 is compatible with other Deco mesh units, allowing you to mix models within the same mesh network to expand coverage or add features. How do I set up the Deco M4? Download the free Deco app on iOS or Android, plug the primary unit into your modem via the included Ethernet cable, and follow the in-app setup guide. Most users are up and running in under 10 minutes.

Read more less

TP-Link Deco M4 (3-Pack) AC1200 Whole Home Mesh Wi-Fi System Whole-Home Wi-Fi Coverage Up to 370 m² — No More Dead Zones The TP-Link Deco M4 3-pack is an AC1200 dual-band mesh Wi-Fi system that delivers seamless wireless coverage across larger homes and multi-storey properties. Three Deco units work together to cover up to 370 m² under a single network name, supporting up to 100 connected devices with combined speeds of up to 1167 Mbps. As you move through your home, your devices automatically connect to the strongest Deco unit — no manual switching, no dead zones. Key Features AC1200 dual-band mesh Wi-Fi — combined speeds up to 1167 Mbps 3-pack covers up to 370 m² — expandable by adding more Deco units at any time Deco Mesh Technology — single network name with seamless device roaming Supports up to 100 simultaneous connected devices Parental controls — set time limits and block inappropriate content per family member profile Compatible with major Australian ISPs and modem types Simple setup via the Deco app (iOS & Android) — step-by-step guided installation Works with Amazon Alexa for voice control Use Cases Large & Multi-Storey Homes: Three units provide robust coverage across larger floor plans, multiple levels, and homes with thick walls or challenging layouts. Families: Per-profile parental controls let you manage screen time and restrict content for each child independently. High-Device Households: Smartphones, tablets, smart TVs, security cameras, and smart home devices all connect reliably without congestion. Home Offices: Stable, lag-free connections for video conferencing and large file transfers in any room of the house. Renters & Apartment Dwellers: Easy plug-and-play setup with no configuration expertise required — ideal for those who move frequently. Specifications Specification Detail Model Deco M4 (3-Pack) Wi-Fi Standard AC1200 Dual-Band (802.11ac) Combined Wi-Fi Speed Up to 1167 Mbps Coverage (3-Pack) Up to 370 m² Max Connected Devices Up to 100 Mesh Technology TP-Link Deco Mesh — single SSID, seamless roaming App Deco App (iOS & Android) Voice Control Amazon Alexa Parental Controls Yes — per-profile time limits & content filtering Expandable Yes — add more Deco units to extend coverage Weight (3-pack) 2.04 kg Frequently Asked Questions What is the difference between the Deco M4 2-pack and 3-pack? The 2-pack covers up to 260 m², while the 3-pack extends coverage to up to 370 m². The 3-pack is better suited to larger homes, multi-storey properties, or homes with challenging layouts where two units may leave gaps in coverage. Does the Deco M4 work with my Australian ISP? Yes. The Deco M4 is compatible with major Australian ISPs including Telstra, Optus, TPG, Aussie Broadband, and iiNet, and works with most standard modem and router setups including NBN connections. Do all three Deco units need to be wired together? No. Only the primary Deco unit needs to be connected to your modem via Ethernet. The remaining units communicate wirelessly using the mesh backhaul. For best performance, a wired backhaul connection between units is recommended where cabling is practical. Can I manage the network remotely? Yes. The Deco app allows you to monitor connected devices, adjust parental controls, run speed tests, and manage your network from anywhere via your smartphone. Is the Deco M4 compatible with other Deco models? Yes. The Deco M4 is compatible with other Deco mesh units, allowing you to mix models within the same mesh network to expand coverage or add features as needed. How do I set up the Deco M4? Download the free Deco app on iOS or Android, plug the primary unit into your modem via Ethernet, and follow the in-app setup guide. Most users are up and running in under 10 minutes.

Read more less